Twin Costs
Two each of:
- Dayton DVC 12"
- Parts Express 300-792 plate amps
- Adire FP4 kits
- 8" metal mesh grilles
- two pairs of binding posts
Totaled $442USD and showed up on my Visa as just under $800CDN.
- Add to that $105 CDN for tax and border fees.
- Sonotube was $20 for the 6 feet I had left.
- All the driver and base plate mounting hardware was $50
- The polyfill and ribbing was just over $40.
- The MDF 1.5 4x8 sheets was just under $40.
- Silicon, weather stripping and Glue was about $15.
- Paint was about $30.
Grand total approximately $1100CDN which divided by two is $550CDN per sub which is about $350 USD per sub.
Contact me if you have any questions.
Everyone must see
THIS
at least once!
This page has been viewed
69459
times.